Name: 272AT by Dixon Valve | Push-On Fitting Tool | For use with 1/4" - 3/4" ID Size Hose
SKU: W1120184151
Availability: InStock

272AT by Dixon Valve | Push-On Fitting Tool | For use with 1/4" - 3/4" ID Size Hose

~~$848.96~~ $146.00

Features:Built-in cutter slices through 1/4" - 3/4" I.D. reinforced push-on hose without fraying.Clamp hose into tools vice and apply light pressure on handle to drive in the fitting.A triple reinforce handle to ensure the handle will not bend during use.All component parts and the assembly are made in the USA.Specifications:Tool has four 7/16" diameter mounting…

Availability: In Stock

SKU:: W1120184151

Categories: Hose Equipment

Features:
Built-in cutter slices through 1/4″ – 3/4″ I.D. reinforced push-on hose without fraying. Clamp hose into tools vice and apply light pressure on handle to drive in the fitting. A triple reinforce handle to ensure the handle will not bend during use. All component parts and the assembly are made in the USA.
Specifications:
Tool has four 7/16″ diameter mounting holes for bench mounting.
Installation:
1. To cut your hose, retract the handle, place the hose in the cutter area and pull the handle. 2. After cutting the hose to the desired length, place the hose under the cam handle locking it in place with the hose end aligned with the appropriate mark on the label. 3. Place the barbed end of the fitting against the end of the hose and then pull the handle forward to complete the installation.
Safety Notes:
Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.

Part Number	Previous Part Number	For use with Hose ID
272AT	270AT	1/4″ – 3/4″

Only logged in customers who have purchased this product may leave a review.

920-25-26A by Hannay | #44-19 | 900 Series | Spring Rewind Reel

~~$2,089.97~~$147.00

EP-7526-33-34 by Hannay | 7500 Series | Electric Powered Rewind Reel | 12 Volt DC

~~$2,518.11~~$147.00

82075LP by Dixon Valve | Reelcraft 80000 Series | Spring Driven Hose Reel - with Hose | 1/2" Hose ID | 75ft Hose Length | Steel

~~$1,533.81~~$147.00

KCDJ67-22 KuriCrimp by Kuriyama | H67 Series | Die for Service Crimper | 22.0 - 25.0mm Crimp Range

~~$302.26~~$149.00

Shopping Cart

Your shopping cart is empty.

272AT by Dixon Valve | Push-On Fitting Tool | For use with 1/4″ – 3/4″ ID Size Hose